Data of DRESSLER Katana-7K RF Linear Amplifier
Frequency bands | all HF amateur bands | 1.8 MHz to 29.7 MHz | ||
Power supply | 2 power supply transformers | 5000 VA & 1.5 VA | ||
Plate voltage | 3950 | V | at full output power | |
Screen voltage | 345 | V | stabilized | |
Grid voltage | - 77 | V +/- 10 V | regulated | |
Filament | 27 | V / 3.7 A | ||
Input SWR | 160 | m – 10 m | < 1.15 : 1 | |
Gain | (1.8 – 29.7 MHz) | 17.0 dB | ||
Amplification | Input power | Output power | ||
Measured with a Array Solutions Power Master Accuracy: +/- 1.5% |
10 W 20 W 30 W 40 W 50 W 60 W 70 W 80 W 90 W 100 W 110 W 120 W |
600 W 1200 W 1800 W 2400 W 3000 W 3600 W 4200 W 4800 W 5400 W 6000 W 6600 W 7200 W |
||
Input SSB Signal | 10% of full 1.5 KHz Modulation on / off Ratio 1:9, Interruptions: 30 Hz |
|||
Output limited by Software | RTTY / CW / SSB: 2200 (3000*) W / 3300 (4000*) W / 7200 W * with optional second blower |
|||
Harmonic Output | 50 dB below rated output | |||
IMD | - 43 dB @ 25% power output - 37 dB @ 50% power output - 33 dB @ 100% power output |
|||
Tube | Svetlana GU-78b | |||
Input network | 50 Ohm, 200 W HF Resistor, 5 pol. Chebychev Low Pass Filter |
|||
Output network | Inductor: 18 uH, Caps: 150 pF var. + 470/220 pF fixed / 1000 pF var. + 1.5 nF fixed | |||
Computer control | Plate current (every 5 msec), SWR, all switching functions, no relais switching under power conditions, soft start inrush, 240 sec delay time for full power, turbine blower with 2 speeds. Well regulated screen and grid supply for +ve and -ve currents as well as current limiting to protect the tube and minimize the IMD. It is impossible to override the screen and grid dissipation at any working conditions. |
|||
Metering | Output, SWR, Plate current, Plate voltage, Screen & Grid current / voltage |
|||
Housing | High quality black eloxial aluminia | |||
Dimension | 482w x 157.5h x 512d mm³ | |||
Weight | 45 kg | |||
Price | 230 V line (30 A (UL)): 5995 € optional SSB Tuning Aid 120 € optional Second Blower 170 € |